Crypto Key Generate Rsa General-keys Modulus 2048 Not Working

16.04.2020

dt1.netlify.com › ▆ ▆ Crypto Key Generate Rsa General-keys Modulus 2048 Not Working

Feb 17, 2018 crypto key generate rsa general-keys label tokenkey1 storage usbtoken0: The following example specifies the redundancy keyword: Router(config)# crypto key generate rsa label MYKEYS redundancy. The name for the keys will be: MYKEYS. Choose the size of the key modulus in the range of 360 to 2048 for your. General Purpose Keys. Nov 15, 2018 Switch(config)#ip domain-name xxxxx.com Switch(config)#ip ssh vers 2 Switch(config)#crypto key generate rsa general-keys modulus 2048 Switch(config)username xxxxx privilege 15 password xxxxxxx Switch(config)#enable secret xxxxxxx Switch(config)#line vty 0 4 Switch(config-line)#logging synchronous Switch(config-line)#exec-ti 20 0 (this is a timer in minutes. May 24, 2018 The command I used to generate the RSA is: crypto key generate rsa modulus 2048 (which uses the general-keys) option by default. But it appears to be working now.

Generate A Rsa Crypto Key
Crypto Key Generate Rsa General-keys Modulus 2048 Not Working On Iphone
Crypto Key Generate Rsa General-keys Modulus 2048 Not Working Video

While Encrypting a File with a Password from the Command Line using OpenSSLis very useful in its own right, the real power of the OpenSSL library is itsability to support the use of public key cryptograph for encrypting orvalidating data in an unattended manner (where the password is not required toencrypt) is done with public keys.

The Commands to Run

Generate a 2048 bit RSA Key

You can generate a public and private RSA key pair like this:

openssl genrsa -des3 -out private.pem 2048

That generates a 2048-bit RSA key pair, encrypts them with a password you provideand writes them to a file. You need to next extract the public key file. You willuse this, for instance, on your web server to encrypt content so that it canonly be read with the private key.

Export the RSA Public Key to a File

This is a command that is

openssl rsa -in private.pem -outform PEM -pubout -out public.pem

Generate A Rsa Crypto Key

The -pubout flag is really important. Be sure to include it.

Next open the public.pem and ensure that it starts with-----BEGIN PUBLIC KEY-----. This is how you know that this file is thepublic key of the pair and not a private key.

To check the file from the command line you can use the less command, like this:

less public.pem

Do Not Run This, it Exports the Private Key

A previous version of the post gave this example in error.

openssl rsa -in private.pem -out private_unencrypted.pem -outform PEM

The error is that the -pubout was dropped from the end of the command.That changes the meaning of the command from that of exporting the public keyto exporting the private key outside of its encrypted wrapper. Inspecting theoutput file, in this case private_unencrypted.pem clearly shows that the keyis a RSA private key as it starts with -----BEGIN RSA PRIVATE KEY-----.

Visually Inspect Your Key Files

It is important to visually inspect you private and public key files to makesure that they are what you expect. OpenSSL will clearly explain the nature ofthe key block with a -----BEGIN RSA PRIVATE KEY----- or -----BEGIN PUBLIC KEY-----.

You can use less to inspect each of your two files in turn:

less private.pem to verify that it starts with a -----BEGIN RSA PRIVATE KEY-----
less public.pem to verify that it starts with a -----BEGIN PUBLIC KEY-----

The next section shows a full example of what each key file should look like.

The Generated Key Files

The generated files are base64-encoded encryption keys in plain text format.If you select a password for your private key, its file will be encrypted withyour password. Be sure to remember this password or the key pair becomes useless. Key generator sony vegas pro 12 serial number.

The private.pem file looks something like this:

The public key, public.pem, file looks like:

Protecting Your Keys

Depending on the nature of the information you will protect, it’s important tokeep the private key backed up and secret. The public key can be distributedanywhere or embedded in your web application scripts, such as in your PHP,Ruby, or other scripts. Again, backup your keys!

Remember, if the key goes away the data encrypted to it is gone. Keeping aprinted copy of the key material in a sealed envelope in a bank safety depositbox is a good way to protect important keys against loss due to fire or harddrive failure.

Oh, and one last thing.

If you, dear reader, were planning any funny business with the private key that I have just published here. Know that they were made especially for this series of blog posts. I do not use them for anything else.

Found an issue?

Rietta plans, develops, and maintains applications.

Learn more about our services or drop us your email and we'll e-mail you back.

1. Setup Management IP

First, make sure you have performed basic network configurations on your switch. For example, assign default gateway, assign management ip-address, etc. If this is already done, skip to the next step.

In the following example, the management ip address is set as 192.168.101.2 in the 101 VLAN. The default gateway points to the firewall, which is 192.168.101.1

2. Set hostname and domain-name

Next, make sure the switch has a hostname and domain-name set properly.

3. Generate the RSA Keys

The switch or router should have RSA keys that it will use during the SSH process. So, generate these using crypto command as shown below.

Also, if you are running on an older Cisco IOS image, it is highly recommended that you upgrade to latest Cisco IOS.

4. Setup the Line VTY configurations

Setup the following line vty configuration parameters, where input transport is set to SSH. Set the login to local, and password to 7.

If you have not set the console line yet, set it to the following values.

5. Create the username password

If you don’t have an username created already, do it as shown below.

Note: If you don’t have the enable password setup properly, do it now.

Make sure the password-encryption service is turned-on, which will encrypt the password, and when you do “sh run”, you’ll seee only the encrypted password and not clear-text password.

5. Verify SSH access

From the switch, if you do ‘sh ip ssh’, it will confirm that the SSH is enabled on this cisco device.

After the above configurations, login from a remote machine to verify that you can ssh to this cisco switch.

In this example, 192.168.101.2 is the management ip-address of the switch.

> Add your comment

If you enjoyed this article, you might also like.